![]() Press the “Volume Plus” button of the iDevice to release, press the “Volume Down button” again to release, then press and hold the “Power On button” to not release.ģ. Insert the data cable while keeping the iDevice in the power on or recovery mode.Ģ. (Applicable: iPhone 8/8 Plus, iPhone X Series, iPad Pro3 (11-inch)/(12.9-inch))ġ. How to enter DFU mode on iPhone 8 or above models: ![]() Turn on the “Volume Down Key” until the “DFU Mode” prompts the software connection status and then release the “Volume Down Key”. Do not release it until the iDevice screen goes out and then release the "Power On button" of the device for about 4 seconds, but don't loose it. Press the "Volume Down" button of the iDevice first, do not release it, and then press the "Power On" button of the iDevice. How to enter into DFU mode on iPhone 7 or iPhone 7Plu s:Ģ. (Note: iPad Air 3/mini 5 still uses this method). "HOME button", until the software connection status prompts "DFU mode" and then release the "HOME button". Do not release it until the iDevice screen goes out and then release the "Power button" of the iDevice for about 4 seconds, but do not release it. Press the "HOME" button of the iDevice first, do not release it, and then press the "Power button" of the iDevice. Insert the USB cable while keeping the iDevice in the power on or recovery mode.Ģ. ![]() How to enter DFU mode for iPhone 6s and earlier models, iPad or iPod tou ch:ġ. Normal mode, Recovery mode, DFU mode all can be flashed in Easy Flash Section. If you encounter special circumstances such as white apple, you can refer to the following models into the DFU mode, after entering DFU mode flash it again.) Step 2 : Choose the firmware you want to flash, select one of the three modes among Quick Flash Mode, Retain User’s Data, Anti-Recovery Flash. (Easy Flash doesn't require to enter into DFU mode. Step 1 : First, download and install the latest version of 3uTools, connect the iDevice to the computer with a USB cable Go to Flash & JB → Easy Flash , when connection succeeds will automatically match the flash firmware. As shown below, the supported available iOS versions will be displayed inline. Because each memory unit of the hard disk chip in the iDevice need to be formatted, the flashing speed will be very slow and take up to several hours. ※ Anti-Recovery Flash: This mode is suitable for people who want to sell their own iDevice or want to destroy the private data inside the iDevice. All installed applications and user data in the iDevice will be preserved. ※ Retain User’s Data : This mode is only used to update the iOS version or try to repair the iOS version. ※ Quick Flash Mode: This mode is suitable for maintenance staff, sales clerk and ordinary users to achieve these goals: update iOS version quickly clear user data, restore to factory state or try to repair iOS version On 3uTools Easy Flash, there are three modes: Quick Flash Mode, Retain User’s Data, Anti-Recovery Flash.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |